Different insoles are available for Special Fighter Pro to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Special Fighter Pro has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Special Fighter Pro to be adapted even more optimally to the foot and to support its anatomical structure.

The Special Fighter Pro meets all requirements of the S3 classification. However, as the shoe is certified according to the fire brigade standard DIN EN 15090, it cannot be designated as an S3 shoe.

However, as the shoe is certified according to the fire brigade standard DIN EN 15090, it cannot be designated as an S3 shoe.

The Special Fighter has no cut protection, but is therefore slightly lighter than the Fire Flash Gamma. It is also cut slightly lower than the other two models. The Special Fighter Pro is equipped with a GORE-CROSSTECH® membrane, which not only protects against water ingress, but also against blood and body fluids. The other two models are only waterproof.

The Special Fighter Pro is a firefighter boot with a lower shaft and protection against body fluids, blood and water ingress.

The Special Fighter Pro can be cared for quickly and easily. With black shoe polish, which does not impair the breathability of the leather, and a waterproofing agent, the shoe is ready for any weather. For this model, we especially recommend our black shoe polish, which contains Sun Reflect pigments. This minimises the heating of the shoe by 20%.

The uncomplicated care of the Special Fighter Pro ensures long-lasting enjoyment of the shoe's quality.

Thanks to Gore Crosstech, the Special Fighter Pro is not only waterproof, but also protects against the entry of blood and body fluids.

The Special Fighter Pro can be used in any work without any restriction.

The Special Fighter Pro can be used both indoors and outdoors. Certified according to the fire brigade standard DIN EN 15090, the Special Fighter Pro meets the highest safety requirements for fire fighting.

For all those who work indoors and outdoors under challenging conditions.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Special Fighter Pro is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.